PRODUCTS
Junlin Techonogy has three main products: Acoustic Hardware & Sensor, Voiceprint Software, and Acoustic Detection & Analysis System.
Junlin's self-developed professional intelligent acoustic hardwares and sensors are specifically designed according to different application scenarios, to adapt the needs of users in different environment.
Single MEMS microphone with coupled cavity;
The coupled cavity directly touches the detected devices by the use of the stethoscope effect;
Effectively reduce the noise influence of other mechanical equipments;
Be able to adapt to the environment of high temperature, high humidity and high grease.
Transmission Mode: Wired Connection
Performance Index
Sensitivity:-40dB@1kHz,0dB=1V/Pa | SNR: >+65dB
Frequency Response: 20Hz~20kHz | Maximum Output: ±1V
Working Temperature & Humidity: -40°C~+85°C、0%~95%RH |
Protection Class: IP67
Based on the Bone Conduction Technology;
Capture the solid sound directly;
Be able to naturally filter out the ambient noise, and ensure the definition of the signal;
Totally-enclosed mechanism ensures the good performance in the harsh natural environment.
Transmission Mode: Wired Connection
Performance Index
Sensitivity:-36dB@1kHz,0dB=1V/Pa | SNR: >+68dB
Frequency Response: 20Hz~10kHz | Maximum Output: ±1V
Working Temperature & Humidity: -40°C~+85°C、0%~95%RH |
Protection Class: IP67
Special design of tone and multi-sound head array;
Optimize the directivity to super directivity;
Protection class of IP55, could prevent the microphone from wind, rain, snow and sand;
ICP power supply, ensures the product commonality.
Transmission Mode: Wired Connection
Performance Index
Sensitivity:-37dB@1kHz,0dB=1V/Pa | SNR: >+70dB
Frequency Response: 20Hz~20kHz | Maximum Output: ±1.5V
Working Temperature & Humidity: -40°C~+80°C、0%~95%RH |
Protection Class: IP55
Has optimized the frequency response for the angles of 0 & 90 degrees;
Capture the sound from various directions of the environment indistinguishably;
Optimized the frequency response of the pickup part, keeps the frequency response of the sensor in a relatively steady status.
Transmission Mode: Wired Connection
Performance Index
Sensitivity:-35dB@1kHz,0dB=1V/Pa | SNR: >+68dB
Frequency Response: 20Hz~20kHz | Maximum Output: ±1V
Working Temperature & Humidity: -40°C~+85°C、0%~95%RH
Flexible network mode;
Be able to adapt different site environment;
Ensured the effective transmission of the signal.
Transmission Mode: Wired Connection / 4G / WIFI
Performance Index
interface standard: ICP / Voltage Source
Sampling Rate: 16kHz
Sampling accuracy: 16bit